Skip to main content

The Genting Valley - hanya mimpi ...

Back in 2002, we bought a plot of land somewhere in Batang Kali, called The Genting Valley. It wasn't that big but I believe good enough to build our retirement home. Made a loan for a plot of about 7000psf, and off we went flying to UK for 5 good years.

In 2007, we came back home from UK and our first visit to the project, only tears came out of our eyes. The project was abandoned, even though the plots had been cleared, but nothing much else. What left are the guard houses for phases that were all sold out. And we've been fighting to get our right with the help from the pro-team committee which represent all the buyers headed up by Bob Steedman. The latest news from the liquidator doesn't seem to be any favourable to us so, we gathered on the 9th Dec, 2012 at Phase 2A to air our displeasure to the parties involved including the liquidator, banks and the government agencies which wouldn't help much. As of now, what we could do is to dream of it. Hope the directors of Jade San going to be hunted by bad dreams, bad businesses and burned in hell!!!

Photos taken from today's gathering:

Tn Hj Mustafa, Ketua Cabang PKR Hulu Selangor was there too. Where is YB Kamalnathan? I had a good laugh when one MakCik said that she is better off voting for PAS in the next election rather than voting the BN for being indifferent not trying to help us out. Me? I'm pengundi atas pagar .. my undi is rahsia :P


Popular posts from this blog

Raspberry Pi + svxlink = Low power echolink node

What is the easiest way to get echolink node up and running on raspberry pi? Surely, get a premade image which has everything inside. I've created one image which can fit into 2GB SD card for this, just follow the following steps to get it up and running:

For hardware, you need to have the following:
Raspberry Pi for sure, with a minimum 4GB SD cardA USB echolink interface, can be commercially sourced or DIY. There are many DIY schematics out there that you could follow.  Here is the configuration on how to get the things working together, courtesy of website:

For software:
Download the following prepared image from google drive, it is based on raspbian-2015-02-16 image and has pre-installed svxlink-14.08. raspi-wheezy-svxlink.img.zipUnzip the file and copy it to your SD card using the following instructions that can be found here.Boot up the RasPi, if you do not have an HDMI monitor, you may want to access the RasPi from your terminal emulator (putty or the like), connec…

Configuring TechniColor TG784N V3 (Maxis issued broadband router) to use different DNS servers

Previous write up deleted. It seems to change the DNS servers in as shown on the status, but it does not really work.

Check the following website, this seems to work:

This can be done from the WEB GUI too, go into the following configuration path:

In my example above, I'm using paid service unblock-us instead of google public DNS servers.

Debugging DMEE

I've come across many posting on the Internet (via google search), people asking on how to debug a DMEE for payment program. One of the few suggestion was to create a user exit just before the node that we would like to debug and put our breakpoint there. It seems that SAP has built-in this feature without needing us to create a user exit (available in ECC 6, have no idea if this is available on prior releases). Here is how you can put your breakpoint without any coding.

1. Display your DMEE tree using transaction: DMEE_DEBUG.

2. Click on the node that you would like to debug.
3. Go to conditions tab, you could see the Set Breakpoint button. Click to set.

4. Run the SAPFPAYM and specified the payment run date/id, payment format etc. SAP will stop at the node which you point your breakpoint at, as in 2.
5. To remove your breakpoint, just run the DMEE_DEBUG again, there is an option to delete all own breakpoints or all.