Skip to main content

House is 95% ready to be occupied!

From the above, to:

Finally, after almost four months, the house is now ALMOST ready to be occupied. What we have done so far are:

1. Extended our wet kitchen to the side of the house.
2. Extended the porch to the front.
3. Replaced the tiles for the porch to a much better looking IMHO.
4. Knocked down the downstair's toilet/bathroom and moved it to the side of the house.
5. Extended the small room downstair and change it to be my office and radio shack.
6. Put in a rustic looking kitchen cabinet made of hardwood.
7. Windows & doors grills, for whatever reason, we've decided to have the grills.

Things to do:

1. Furnish the house with furniture , we've none for our living room for now.
2. Bring all whatever furniture we have in our current house to the new house.
3. Furnish the bedrooms and my office, they need new stuff in there .. IKEA anyone :)
4. Curtains!
5. Change the gate to auto-gate.
6. Phone line & broadband, can't work w/o them (oh I've 3G though :)
7. Have a MOVE-IN DATE!!! We still have not decided on when we are going to move in :)

Here is where my new home-office going to be:


and this it how it will look with IKEA furniture hopefully:


kijal said…
where r pics fm d interior?
WiraOne said…
Still not ready yet.. I'm yet to get the furniture and more things need to be put in place before I snap photos and show them here :)

Anyway, did my ikea shopping on Friday night and managed to get the galant table, two set of effektiv wall cabinets and two Mikael drawers. I've assembled the cabinets but yet to put in place .. the one drawer is done and another to go .. will go there tomorrow night and finish the drawer, and fit the cabinets ..

Popular posts from this blog

Configuring TechniColor TG784N V3 (Maxis issued broadband router) to use different DNS servers

Previous write up deleted. It seems to change the DNS servers in as shown on the status, but it does not really work.

Check the following website, this seems to work:

This can be done from the WEB GUI too, go into the following configuration path:

In my example above, I'm using paid service unblock-us instead of google public DNS servers.

Raspberry Pi + svxlink = Low power echolink node

What is the easiest way to get echolink node up and running on raspberry pi? Surely, get a premade image which has everything inside. I've created one image which can fit into 2GB SD card for this, just follow the following steps to get it up and running:

For hardware, you need to have the following:
Raspberry Pi for sure, with a minimum 4GB SD cardA USB echolink interface, can be commercially sourced or DIY. There are many DIY schematics out there that you could follow.  Here is the configuration on how to get the things working together, courtesy of website:

For software:
Download the following prepared image from google drive, it is based on raspbian-2015-02-16 image and has pre-installed svxlink-14.08. raspi-wheezy-svxlink.img.zipUnzip the file and copy it to your SD card using the following instructions that can be found here.Boot up the RasPi, if you do not have an HDMI monitor, you may want to access the RasPi from your terminal emulator (putty or the like), connec…

Debugging DMEE

I've come across many posting on the Internet (via google search), people asking on how to debug a DMEE for payment program. One of the few suggestion was to create a user exit just before the node that we would like to debug and put our breakpoint there. It seems that SAP has built-in this feature without needing us to create a user exit (available in ECC 6, have no idea if this is available on prior releases). Here is how you can put your breakpoint without any coding.

1. Display your DMEE tree using transaction: DMEE_DEBUG.

2. Click on the node that you would like to debug.
3. Go to conditions tab, you could see the Set Breakpoint button. Click to set.

4. Run the SAPFPAYM and specified the payment run date/id, payment format etc. SAP will stop at the node which you point your breakpoint at, as in 2.
5. To remove your breakpoint, just run the DMEE_DEBUG again, there is an option to delete all own breakpoints or all.