Skip to main content

At last, we've got the keys!



On the 1st Dec 2007, we're officially the owner of a house no 9, Jalan BRP 2/1B at Bukit Rahman Putra. It was quite a long wait since we signed the S&P back in July 2007. We thought everything will get speed up since we've got a pre-approval from the bank. It seems that the other party's bank was so slow in releasing all the required documents.. hence the delay.

Yesterday, we brought a contractor for renovation. We were told that the BPT will surely won't allow us to do any external extension to our house. My wife called the BPT and was assured that they won't allow any extension, but was told that if it is already built, we might get fined and that was it.. so.. in another word, there is always a 'backdoor' .. build the extension and if we get caught, just pay the fine.. sound reasonable :D

We'll see how much is the quote will be. We need to do some painting too .. actually, the whole house need to be repainted. The outside paint is peeling off and the inside, somehow the developer used a really cheap paint (OR mix with low quality paint). I won't be surprised if the contractor will quote a high price but will see if everything fit our budget, we'll just go on with the renovation.. otherwise, will do the major renovation first.

Comments

Popular posts from this blog

Raspberry Pi + svxlink = Low power echolink node

What is the easiest way to get echolink node up and running on raspberry pi? Surely, get a premade image which has everything inside. I've created one image which can fit into 2GB SD card for this, just follow the following steps to get it up and running:

For hardware, you need to have the following:
Raspberry Pi for sure, with a minimum 4GB SD cardA USB echolink interface, can be commercially sourced or DIY. There are many DIY schematics out there that you could follow.  Here is the configuration on how to get the things working together, courtesy of svxlink.de website:

For software:
Download the following prepared image from google drive, it is based on raspbian-2015-02-16 image and has pre-installed svxlink-14.08. raspi-wheezy-svxlink.img.zipUnzip the file and copy it to your SD card using the following instructions that can be found here.Boot up the RasPi, if you do not have an HDMI monitor, you may want to access the RasPi from your terminal emulator (putty or the like), connec…

Configuring TechniColor TG784N V3 (Maxis issued broadband router) to use different DNS servers

Previous write up deleted. It seems to change the DNS servers in as shown on the status, but it does not really work.

Check the following website, this seems to work:

http://www.o2help.co.uk/router-change-dns/

This can be done from the WEB GUI too, go into the following configuration path:


In my example above, I'm using paid service unblock-us instead of google public DNS servers.

Debugging DMEE

I've come across many posting on the Internet (via google search), people asking on how to debug a DMEE for payment program. One of the few suggestion was to create a user exit just before the node that we would like to debug and put our breakpoint there. It seems that SAP has built-in this feature without needing us to create a user exit (available in ECC 6, have no idea if this is available on prior releases). Here is how you can put your breakpoint without any coding.

1. Display your DMEE tree using transaction: DMEE_DEBUG.


2. Click on the node that you would like to debug.
3. Go to conditions tab, you could see the Set Breakpoint button. Click to set.



4. Run the SAPFPAYM and specified the payment run date/id, payment format etc. SAP will stop at the node which you point your breakpoint at, as in 2.
5. To remove your breakpoint, just run the DMEE_DEBUG again, there is an option to delete all own breakpoints or all.